Delivery Time:

iPU T2 RD Tethered Bypass T2 New iBridge 7.4 + 7.5 + 7.6 + 8.0 + 8.1 All New Supported


Download Tool ??

 

 iPU T2 RD Tethered NEW 2.0 VER Relese

Steps for Bypass ?
1. Restore to the latest 7.4 BridgeOS +  Register ECID
2. Open App Click Patch Device once done Press Bypass Button.
3. When u see a success message and Mac turned off the touch bar ( press cmd + R )
4. Connect Wifi and Install MAC OS from Recovery Mode
5. Once successful installation is done

Add Passcode ?
Restart Mac ?

It’s a tethered bypass in these 2 situations:
- If u force shutdown ? power button for 5s
- If the battery goes off ????
( fixed in next update )

If Relocked - frozen screen on startup ( put dfu ) and press Boot Button Only.

Free Re-Bypass in case you have restored Mac and ECID Register.

USAGE:

Usage is very simple:

Fresh Bypass:
 1. Enter DFU mode.
 2. Authenticate the device.
 3. Patch the device.
 4. Once successful, enter DFU mode again.
 5. Bypass the device.
 6. Press the power button once, and immediately press and hold Option + Command + R or Command + R.
 7. Connect to Wi-Fi.
 8. From the recovery mode, erase the disk using Disk Utility.
 9. Connect to Wi-Fi. If Wi-Fi is not detected (no networks are shown), click on the Wi-Fi icon > Other > manually enter the SSID (network name), choose the password type, and enter the password.
 10. Install the system.

If you need to rebypass (already installed system):
 1. Enter DFU mode.
 2. Click on "Bypass device."
 3. Press the power button once and wait until the system loads.
 4. Done.

 

How To Verify:

In Case of any issue Be Sure You Are Following Correct Procedure. If Still Any Issue Make A Video of Complete Procedure in English Language Only upload at www.youtube.com & Click at Publish As Public & with Order Number & Video Proof At Website. 

We Will Check With iPU Team & Update you there at ticket with their decision.