Hello LPro AIO - iPad Pro 1. 12.9 - Purple mode DCSD need first in the world ( A1584 & A1652 )

Delivery Time: auto api

How to place an order?

  • This service need ECID to process your order 

  • Get ECID of your device write correctly in the ECID field 

  • ECID MUST CONTAIN 16 DIGIT Do not Write incorrect ECID

 

Maximum Delivery Time:

  • auto api

Delay warning

  • Sometimes due to technical issues, service will delay in this case you need to cooperate with us

 

Supported Model

  •  iPad Pro 1. 12.9  

LPro AIO 3.7
Guide (AUTO METHOD ONLY) :
Step 1: Connect Device in "RECOVERY MODE"
Step 2: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 3: Click "Purple Mode" Button

This Step NO NEED DCSD for iPhone 7-X (A10/A11)
DCSD for iPads and iPhone 6s, 6s Plus Needed
After Successful Write, Device Automatically Enters Recovery Mode

Step 4: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 5: Click "Run PwnDFU" Button
Step 6: Click "Boot Device" Button
Step 7: Click "Check SSH"
(Wait for the Button to light up to become this Check SSH ??)
Step 8: Click "HELLO BYPASS"

Wait for the Device to turn on and the Device is Successfully Activated
—————————————————————

Guide (MANUAL METHOD ONLY) :
Step 1: Connect Device in "NORMAL MODE"
It Will Show Serial To Change Manually
Step 2: Connect Device in "RECOVERY MODE"
Step 3: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 4: Click "Purple Mode" Button

You Can Connect DCSD Now and Click OK or Click Close.
Click Close and Connect DCSD Cable for Manual Methods

Step 5: Open MagicCFG or Any Tool to Edit Serial You Copied in Step 1

PLEASE VERIFY IF SERIAL CHANGED SUCCESSFULLY and Proceed Next Step Carefully. Read Device info in Normal Mode to verify Serial Change.

Step 6: Click "Hello Bypass" Button in Normal MODE FIRST (DO NOT SKIP)


This Checks if Device Data is OK For Bypass. Proceed Next Step After Success Message.

Step 7: Connect Device in "RECOVERY MODE"
Step 8: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 9: Click "Run PwnDFU" Button
Step 10: Click "Boot Device" Button
Step 11: Click "Check SSH"
(Wait for the Button to light up to become this Check SSH ??)
Step 12: Click "HELLO BYPASS"

How To Verify:

In Case of any issue Be Sure You Are Following Correct Procedure. If Still Any Issue Make A Video of Complete Procedure in English Language Only upload at www.youtube.com & Click at Publish As Public & with Order Number & Video Proof At Website. 

We Will Check With iPU Team & Update you there at ticket with their decision.